D-Link DGS-1250 Series - Page 39

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
30
The fields that can be configured in Recurring Settings are described below:
Parameter Description
From: Week of the Month
Select week of the month that summer time will start.
From: Day of the Week
Select the day of the week that summer time will start.
From: Month
Select the month that summer time will start.
From: Time
Select the time of the day that summer time will start.
To: Week of the Month
Select week of the month that summer time will end.
To: Day of the Week
Select the day of the week that summer time will end.
To: Month
Select the month that summer time will end.
To: Time
Select the time of the day that summer time will end.
Offset
Enter the number of minutes to add during summer time. The default value is 60.
The range of this offset is 30, 60, 90, and 120.
The fields that can be configured in Date Settings are described below:
Parameter Description
From: Date of the Month
Select date of the month that summer time will start.
From: Month
Select the month that summer time will start.
From: Year
Enter the year that the summer time will start.
From: Time
Select the time of the day that summer time will start.
To: Date of the Month
Select date of the month that summer time will end.
To: Month
Select the month that summer time will end.
To: Year
Enter the year that the summer time will end.
To: Time
Select the time of the day that summer time will end.
Offset
Enter the number of minutes to add during summer time. The default value is 60.
The range of this offset is 30, 60, 90, and 120.
Click the Apply button to accept the changes made.