DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
228
Network Protocol Port Protect Settings
This window is used to display and configure the network protocol port protection settings.
To view the following window, click Security > Network Protocol Port Protect Settings, as shown below:
Figure 9-76 Network Protocol Port Protect Settings Window
The fields that can be configured are described below:
Parameter Description
TCP Port Protect State
Select to enable or disable the TCP port network protocol protection function here.
UDP Port Protect State
Select to enable or disable the UDP port network protocol protection function
here.
Click the Apply button to accept the changes made.
To Next Page
Loading...
