DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
170
Parameter Description
Ethernet Type Enter the Ethernet type hexadecimal value here. This value must be between 0x0
and 0xFFFF. When the Ethernet type profile is selected, above, the appropriate
hexadecimal value will automatically be entered.
Ethernet Type Mask
Enter the Ethernet type mask hexadecimal value here. This value must be
between 0x0 and 0xFFFF. When the Ethernet type profile is selected, above, the
appropriate hexadecimal value will automatically be entered.
CoS Select the CoS value that will be used here. The range is from 0 to 7.
VID
Enter the VLAN ID that will be associated with this ACL rule here. The range is
from 1 to 4094.
Time Range
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
ACL Interface Access Group
This window is used to display and configure the ACL interface access group settings.
To view the following window, click ACL > ACL Interface Access Group, as shown below:
Figure 8-16 ACL Interface Access Group Window
The fields that can be configured are described below:
Parameter Description
From Port - To Port
Select the range of ports that will be used for this configuration here.
Direction Specifies that the In direction is used.
Action Select the action that will be taken here. Options to choose from are Add and
Delete.
Type Select the ACL type here. Options to choose from are IP ACL, IPv6 ACL, and
MAC ACL.
ACL Name
Enter the ACL name here. This name can be up to 32 characters long. Click the
Please Select button to select an existing ACL from the list.
Click the Apply button to accept the changes made.
To Next Page
Loading...
