DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
272
Firmware Backup to HTTP
This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown
below:
Figure 14-23 Firmware Backup to HTTP Window
The fields that can be configured are described below:
Parameter Description
Source File Select the firmware on the Switch that will be backed up to the local PC here.
Options to choose from are Image 1 and Image 2.
Click the Backup button to initiate the firmware backup. Wait for the Web browser to prompt where to save the file on
the local PC.
Configuration Restore & Backup
Configuration Restore from HTTP
This window is used to initiate a configuration restore from a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP,
as shown below:
Figure 14-24 Configuration Restore from HTTP Window
The fields that can be configured are described below:
Parameter Description
Source File Click the Browse button and navigate to the configuration file on the local PC
here. This file will be uploaded to the Switch.
Destination File Select the destination for the configuration file on the Switch here. Options to
choose from are:
• Configuration 1 - Select this option to use configuration 1 as the destination.
• Configuration 2 - Select this option to use configuration 2 as the destination.
• running-config - Select this option to use the running configuration as the
destination.
• startup-config - Select this option to use the start-up configuration as the
destination.
Replace
Select this option to replace the running configuration on the Switch with this one.
To Next Page
Loading...
