DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
64
The fields that can be configured are described below:
Parameter Description
Path
Enter the path string.
Click the Go button to navigate to the path entered.
Click the Copy button to copy a specific file to the Switch.
Click the Boot File button to configure the bootup image and configuration file settings.
Click the c: hyperlink to navigate the C: drive
After clicking the c: hyperlink, the following window will appear:
Figure 4-43 File System (Drive) Window
Click the Go button to navigate to the path entered.
Click the Previous button to return to the previous window.
Click the Copy button to copy a specific file to the Switch.
Click the Boot File button to configure the bootup image and configuration file settings.
Click the Delete button to remove a specific file from the file system.
NOTE: If the boot configuration file is damaged, the Switch will automatically revert back to the
default configuration.
NOTE: If the boot image file is damaged, the Switch will automatically use the backup image file in
the next boot up.
After clicking the Copy button, the following window will appear.
Figure 4-44 File System (Copy) Window
The fields that can be configured in Copy File are described below:
Parameter Description
Source
Select the source for the copy here. Options to choose from:
To Next Page
Loading...
