DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
197
Parameter Description
MAC Address
Enter the MAC address of the binding entry here.
VID
Enter the VLAN ID of the binding entry here.
Type
Select the type of binding entry to find here. Options to choose from are All,
DHCP Snooping, and Static.
• Selecting All specifies that all the DHCP binding entries will be displayed.
• Selecting DHCP Snooping specifies to display the IP-source guard binding
entry learned by DHCP binding snooping.
• Selecting Static specifies to display the IP-source guard binding entry that is
manually configured.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IP Source Guard HW Entry
This window is used to view the IPSG hardware entries.
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard HW Entry, as
shown below:
Figure 9-38 IP Source Guard HW Entry Window
The fields that can be configured are described below:
Parameter Description
From Port - To Port
Select the appropriate port range used for the query here.
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
