DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
38
To view the following window, click Management > SNMP > SNMP Community Table Settings, as shown below:
Figure 4-6 SNMP Community Table Settings Window
The fields that can be configured are described below:
Parameter Description
Key Type The only supported key type is Plain Text.
Community Name
Enter an alphanumeric string of up to 32 characters that is used to identify
members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch’s SNMP agent.
View Name
Enter an alphanumeric string of up to 32 characters that is used to identify the
group of MIB objects that a remote SNMP manager is allowed to access on the
Switch. The view name must exist in the SNMP View Table.
Access Right Select the access right here. Options to choose from are Read Only and Read
Write.
• Read Only - SNMP community members using the community string created
can only read the contents of the MIBs on the Switch.
• Read Write - SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the Switch.
IP Access-List Name
Enter the name of the standard access list to restrict the users that can use this
community string to access to the SNMP agent.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
To Next Page
Loading...
