EasyManua.ls Logo

D-Link DGS-1250 Series - Page 90

D-Link DGS-1250 Series
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
81
The fields that can be configured in Port Settings are described below:
Parameter Description
From Port - To Port
Select the range of ports that will be used for this configuration here.
State
Select to enable or disable the surveillance VLAN feature on the specified
port(s) here. When surveillance VLAN is enabled for a port, the port will
automatically be learned as an untagged surveillance VLAN member and the
received untagged surveillance packets will be forwarded to the surveillance
VLAN. The received packets are determined as surveillance packets if the
source MAC addresses of the packets comply with the Organizationally Unique
Identifier (OUI) addresses.
Click the Apply button to accept the changes made.
MAC Settings and Surveillance Device
This window is used to display and configure surveillance devices and their MAC settings.
To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings and
Surveillance Device, as shown below:
Figure 5-22 MAC Settings and Surveillance Device Window
The fields that can be configured are described below:
Parameter Description
Component Type
Select the component type here. Option to choose from are:
Video Management server - Specifies the surveillance device type as Video
Management Server (VMS).
VMS Client/Remote Viewer - Specifies the surveillance device type as VMS
client.
Video Encoder - Specifies the surveillance device type as Video Encoder.
Network Storage - Specifies the surveillance device type as Network
Storage.
Other IP Surveillance Device - Specifies the surveillance device type as
other IP Surveillance Devices.
Description
Enter the description for the user-defined OUI here. This string can be up to 32
characters long.
MAC Address
Enter the OUI MAC address here. If the source MAC addresses of the received
packet matches any of the OUI pattern, the received packet is determined as a
surveillance packet.
Mask
Enter the matching bitmask for the OUI MAC address here.

Table of Contents

Other manuals for D-Link DGS-1250 Series

Related product manuals