User's Manual
86
Click and then you can go to the
Face Database Config
page where you can
configure the face databases.
Figure 6-17 Configure face comparison (by recorder)
2) Configure the parameters.
Table 6-12 Configuration of target face database
Icon/Parameter Description
The selected database is enabled by default. Click the icon to disable
it.
Delete the database.
Similarity
Set the similarity threshold for comparison.
The system compares the detected result with the images in the
database. An alarm is triggered when the similarity reaches the
threshold.
Alarm Rule Click to select a color for the alarm rule box.
Display Feature Pane
Select the checkbox to enable the features pane. The features pane
appears on the live video once there is an alarm.
3) Click
Select
next to
Event Linkage
to set alarm actions.
Step 7 (Optional) Enable the stranger mode.
With the stranger mode enabled, an alarm is triggered when the face comparison similarity
is lower than the configured threshold.
1) Click to enable the stranger mode.
2) Set the parameters.
Table 6-13 Stranger control mode description
Parameter Description
Alarm Rule
Click to select a color for the alarm rule
box.
Display Feature Pane
Click to enable the features pane. The
features pane appears on the live video once
there is an alarm.
3) Click
Select
next to
Event Linkage
to set alarm actions.
Step 8 Click
Save
.
To Next Page
Loading...
Need help?
General
