To Next Page

To Previous Page

User's Manual

the HDD slot.

Installing HDD

①

Press the button on the

front panel of IVSS, open the

handle, and then pull out the

HDD box.

②

Place one side of the HDD

closely along the upper side

of the box and press down to

push the HDD down to the

lower side of the mounting

surface.

③

Insert the HDD box into

the HDD slot, press it to the

bottom, and then close the

box handle.

Removing HDD

①

Press the button on the

front panel of IVSS, open the

handle, and then pull out the

HDD box.

②

On the back of the HDD

box, press hard on the

position indicated by the

arrow.

③

Take out the HDD and

reinsert the box to the slot.

Push it to the bottom and

close the box handle.

3.3.3 16/24-HDD Series

If you have not pushed the HDD box to the bottom, do not close the handle to avoid any damage to

the HDD slot.

Installing HDD

Dahua Technology DHI-IVSS7108-M User Manual

Questions and Answers: