User's Manual
137
Figure 6-107 Vehicle total
●
Point to a picture and click , or double-click the picture, so the system starts playing back
video (10 s before and after the snapshot moment).
●
Point to a picture and click to export video and picture.
Make sure that USB storage device is connected during local operation.
On the
LIVE page, click . The NON-MOTOR VEHICLE TOTAL window is displayed. Click , and
then select
IVS. The detected non-motor vehicles are displayed.
●
Point to a picture and click , or double-click the picture, so the system starts playing back
video (10 s before and after the snapshot moment).
●
Point to a picture and click to export video and picture.
6.6.4 IVS Search
Search for IVS records.
Step 1 On the
LIVE page, click and then select AI SEARCH > IVS.
Step 2 Select the remote device, and set event type, effective target and time.
Step 3 Click Query.
Figure 6-108 Search result
Click the panel. The following operation icons are displayed.