User's Manual
45
Make sure that the default NIC is online.
Step 5 Click
Next
.
5.2.2 Configuring P2P Settings
P2P is a peer to peer technology. You can scan the QR code to download the mobile app without
DDNS service or the port mapping or installing the transmission server. After you register the Device
to the app, you can view the remote videos, play back recorded videos and more.
●
Make sure that the Device has connected to the network.
●
To use the P2P function, we will collect information such as IP address, MAC address, and serial
number. The collected information is only used for remote access.
Procedure
Step 1 On
Network
page, click
Next
.
Figure 5-7 P2P access
Step 2 Click to enable P2P function. The function is disabled by default.
Step 3 Click
OK
.
You can register the Device to the app for remote monitoring and management. For
details, see the corresponding user's manual of the app.
5.3 Login
You can operate the device by using the local interface, web interface and PC client.
●
Monitor and mouse are needed for local operation.
●
You can remotely access the Device through the web interface and PC client. We recommend
you use the PC client.
To Next Page
Loading...
Need help?
General
