User's Manual
192
8.3 Event Management
Log in to the PC client. Click on the upper-right corner and then click
Event
.
On the page, configure alarm events for the Device and remote devices.
●
Select the root node on the device tree to set alarm events for the Device.
●
Select a remote device on the device tree to set alarm events for the remote device.
●
The alarm event might be different depending on the model you purchased.
●
means that the corresponding alarm event has been enabled.
●
means that AI by Camera has been enabled; means that AI by Recorder has been
enabled; means that both AI by Camera and AI by Recorder have been enabled.
Figure 8-26 Event management
8.3.1 Alarm Actions
The system triggers the corresponding actions when an alarm occurs.
The supported actions might be different depending on the AI function.
On the alarm configuration page, click
Select
next to
Event Linkage
to select linkage actions.
Configure actions according to your actual need.
To Next Page
Loading...
Need help?
General
