User's Manual
148
◇
Select the preset, click to adjust the position of the preset, and then click .
◇
Click to quit.
●
Select a preset and then click to delete it.
●
Click to refresh the preset list.
7.1.3.2.2 Setting a Tour Group
A tour group is a sequential set of presets. When a tour group is used, the PTZ camera automatically
rotates to the presets one by one at the predefined interval.
Procedure
Step 1 Log in to the PC client.
Step 2 Under the
Live
tab, open a view.
Step 3 Select the video window of a PTZ camera.
Step 4 On the PTZ panel, click .
Step 5 Click , enter the name of the new tour group, and then click to save.
Step 6 Click
Add
, select a preset, and then click .
Repeat this step to add multiple presets into the tour group.
Figure 7-13 Add a cruise
Step 7 Execute the tour group.
1) Hover over the name of the tour group.
2) Click next to the name of the tour group. The PTZ camera rotates to the preset
point in the configured sequence.
3) Click to stop the PTZ tour.
Related Operations
●
Edit a tour group: