User's Manual
166
8.1.3 Configuring Remote Devices
Set the attributes, video parameters and other parameters of remote devices connected to IVSS.
The pages might vary with remote devices.
8.1.3.1 Configuring Attributes of Remote Devices
Set the name of remote devices, and view information on the remote devices.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner of the page and then click
Access Management
.
You can also click
Access Management
from the configuration list on the home page.
Step 3 Select a remote device from the device tree and then click the
Attribute
tab.
You can view information on the remote device, such as its model, MAC address, system
version, and more.
Step 4 (Optional) Change the name of the remote device, and enter descriptions for the remote
device, and then click
Save
.
8.1.3.2 Managing Video Channels of Multichannel Devices
When the connected remote device has multiple video channels, you can add or delete the video
channels connected to the Device.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner of the page and then click
Access Management
.
You can also click
Access Management
from the configuration list on the home page.
Step 3 Select a multichannel remote device from the device tree and then click the
Connection
tab.
You can view the video channels under the group.
Step 4 Add or delete the video channels.
●
Add video channels.
Click
Add Video Channel
to add more video channels to the group.
●
Delete video channels.
◇
Delete one by one: Click
Delete
under
Operation
to delete the corresponding
video channel.
◇
Delete in batches: Select one or more video channels, and then click
Delete Video
Channel
.
8.1.3.3 Configuring Video Parameters
Set different video parameters according to different bit stream types based on the bandwidth.
To Next Page
Loading...
Need help?
General
