User's Manual
201
Name Description
Account lockout
The system triggers an alarm when the number of failed login
attempts has reached the threshold. At the same time, the system
locks current account. It is disabled by default.
Go to
Security
>
Attack Defense
>
Account Lockout
to set the
allowed number of failed login attempts. See "8.5.3.2 Account
Lockout" for detailed information.
Security exception
The system triggers an alarm when a security issue occurs. It is enabled
by default.
Fan speed exception
When the fan speed is abnormal, the system triggers an alarm. It is
enabled by default.
Power alarm
When the power supply is abnormal, the system triggers an alarm. It is
disabled by default.
AI module temp
When the temperature of the AI module is higher than the specified
value, the system triggers an alarm. It is enabled by default.
AI module offline
When the AI module is disconnected from the system, the system
triggers an alarm. It is enabled by default.
This section uses no disk as an example. For other events, the setting steps are similar.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Event
.
You can also click
Event
from the configuration list on the home page.
Step 3 Select the root node on the device tree.
Step 4 Select
Exception
>
No Disk
.