User's Manual
52
Figure 5-12 Search results
Table 5-7 Description of search results
Parameter Description
Start Search
Click
Start Search
to search for remote devices again. Click
Stop Search
to stop search.
Connection
Password
Click
Connection Password
to set the username and password for the
remote devices.
If you do not set the username and password for the remote device, the
system will try to add the remote device by using the username and
password of the Device.
Initialize
Select uninitialized remote devices, and then click
Initialize
to start
initialization. For details, see "5.5.1 Initializing Remote Devices".
Modify IP
Select one or more remote devices, and then click
Modify IP
to change
their IP addresses.
Initialization Status
Click and then select
Initialized
or
Uninitialized
to show initialized
or uninitialized remote devices only.
Operation
●
Click to configure parameters of the remote device.
●
Click to view the real-time video from the remote device.
You can view the live video only when the admin password of the
remote device is admin, or the same as the admin password of the
Device.
Bandwidth
Displays the remaining and total bandwidth. You cannot add more
remote devices when the bandwidth runs out.
Step 2 Select one or more remote devices, and then click
OK
.
To Next Page
Loading...
Need help?
General
