Danfoss FC 300 Design Guide

FC 300 Design Guide
How to Program
" Changing a Group of Numeric Data Values
If the chose n parameter represents a numeric
data value, ch ange the chosen data value by
means of the <> navigation keys as well as the
up/down navigation keys. Us e the <> navigation
keys to m ove the cursor horizontally.
130BP069.10
Use the up/down navigation keys to change the data
value. The up key in crease s the data value, and the
down key decreases the data value. Place the cursor
on the value you want to save and press [OK].
130BP070.10
" Infinitely Variable Change of Numeric
Data Value
If the chose n parameter represen
ts a numeric
data value, select a digit by mean s of the
<> navigation keys.
130BP073.10
Change the selected digit infinitely variably by
means of the up/down navigation keys.
The chose n digit is indicated by the cursor. Place the
cursor on the digit you want to save a nd press [OK].
130BP072.10
144
MG.33.B6.22 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English