Danfoss FC 300 Design Guide

FC 300 Design Guide
How to Order
" Drive Configu r ator
It is possible to design an FC 300 adjustable frequency drive according to the application
requirements by using the ordering number system.
For the FC 300 Series, you can order standard drives and drives with integral options by sending
atypecodestringdescribingtheproductatot
he local Danfoss sales office, i.e.:
FC-302PK75T5E20H1BGCXXXSXXXXA0BXCXXXXD
0
The meaning of the characters in the string c
an be located in the pages containing the
ordering numbers in the chapter How to Select Your VLT. In the example above, a Profibus
DP V1 and a 24 V back-up option are included in the drive.
Ordering numbers for FC 300 standard variants can also be located in the chapter How to Select Your VLT.
Use the Internet-based drive configurator to configure the right drive for the right application
and g enerate the type code string.
The drive configurator will automatically generate an
eight-digit sales number to be delivered to your local sales office.
Furthermore, you can establish a project list with several products and send it to a Danfoss sales representat ive.
The drive configurator can be found on the g loba l Internet site: www.danfoss.com/drives.
83
MG.33.B6.22 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English