Danfoss FC 300

FC 300 Design Guide
How to Program
Function:
Some systems call for avoiding certain output
speeds due to resonance problems in the system.
Enter the upper limits of the speeds to be avoided.
4-63 Bypass Speed To [Hz]
Array [4]
Range:
0 - par. 4-14 Hz
*
0Hz
Function:
Some systems call for avoiding certain output
speeds due to resonance problems in the system.
Enter the upper limits of the speeds to be avoided.
*
default setting ()display text []value for use in communication via serial communication port
191
MG.33.B
6.22 - V LT is a registered Danfoss trademark