Danfoss FC 300 Design Guide

FC 300 Design Guide
Introduction to FC 300
Hand Off
Auto
LCP Keys
Reference Site
Par. 3-13
Active Reference
Hand Linked to Ha nd / Auto Local
Hand -> Off Linked to Ha nd / Auto Local
Auto Linked to Ha nd / Auto Remote
Auto -> Off Linked to Ha nd / Auto Remote
All keys Local Local
All keys Remote Remote
The table shows under which cond itions either the local reference
or the re mote reference is acti ve.
One of them is always active, but both cannot be active at the same time.
Par. 1-00 Configuration Mode dete rm ines what kind of application control principle (i.e., speed, torque or
process control) is used when the remote reference is active (see table above for the conditions).
Par. 1-05 Local Mode Configuration determines the k ind of application control principle
that is used when the local reference is made ac t
ivate.
Reference Han dlin g
Local Reference
23
MG.33.B6.22 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English