Danfoss iC7 Series

d. Attach the cable clamps with screws.
1
2
3
4 5
e30bl520.10
Figure 106: Assembling the Mounting Plate
8.11 Attaching the Control Unit Mounting Plates
Use these instructions to attach 2 or several mounting plates to each other, and to install mounting plates to the cabinet. All the parts
can be found in the accessories bag.
1. Install the mounting plates to each other by fitting the sides together.
108 | Danfoss Drives Oy © 2024.03 AJ475942178716en-000101 / 172K2848A
Design Guide | iC7 Series Liquid-cooled System Modules