Design Guide | iC7 Series Liquid-cooled System Modules
The recommended lifting angle is 60° ± 15°.
3. Lift the system module to the required location.
4.9.3 Lifting the Filters
Use these instructions to lift the L Filter, the LC Filter, the dU/dt Filter, the dU/dt and Common-mode Filter, and the DC/DC Filter.
1. Put the lifting hooks in 4 holes at the top of the filter.
2. If necessary, lift the filter into a vertical position.
The recommended lifting angle is 60° ± 15°.
Figure 11: Example: Lifting the L Filter
3. Lift the filter to the required location.
Danfoss Drives Oy © 2024.03 AJ475942178716en-000101 / 172K2848A | 27
To Next Page
Loading...
