PackTrack™
Reference Manual 215
12. Finally, place a system barcode on the back right edge of a box, about half-
way up the scanner field of view as shown in the illustration below.
13. Measure the distance for X from the left edge of the conveyor bed to the
center of the barcode, and enter that distance in the first box under X-
Coord (mm).
14. Measure the distance for Y from the trigger (PS line) to the barcode scan-
ner's laser line on the barcode (back edge of box), and enter that distance in
th
e first box under Y-Coord (mm).
15. Measure the distance for Z from the conveyor bed to the laser line inter-
secting the barcode, and enter that distance in the first box under Z-Coord
(mm).
16. Click Calibrate 3. PackTrack data is displayed for the third code.
To Next Page
Loading...
Need help?
General
