BC40XX UV Counterfeit Detection
Product Reference Guide 13
The Counterfeit Detector is based on UV fluorescent emission. Real banknotes under
ultraviolet rays usually absorb the UV light and will show special marks made with fluorescent
inks. On the other hand, most counterfeit banknotes only reflect the UV lights, without
showing fluorescent marks.
To use:
1. Quickly press the Base button to light the UV LEDs.
2. Hold the item to be verified under the LED lights to ensure that the special fluorescent
marks are visible.
3. The LEDs are set to switch off automatically after about 2 minutes. To keep the UV LEDs
in always-on mode, quickly press the Base button a second time within 10 seconds of the
first press. To switch them off, simply press the button again.
An external power supply is necessary for full functionality of the Base station with UV
Counterfeit Detector. Use only the recommended AC adapter 12Vdc.
To Next Page
Loading...
Need help?
General
