Codablock F ENTER/EXIT PROGRAMMING MODE
166
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F AIM Check = Disable
Codablock F AIM Check = Enable Check C
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding for the Codablock
F symbology.
Variable Length.
For variable length decoding, a minimum and maximum length may be set.
Fixed Length.
For fixed length decoding, two different lengths may be set.
DEFAULT
Codablock F Length Control = Variable Length
Codablock F = Fixed Length
To Next Page
Loading...
