ENTER/EXIT PROGRAMMING MODE
62
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Wedge Quiet Interval
This option specifies the amount of time to look for keyboard activity before the reader breaks
the keyboard connection in order to transmit data to host. The selectable range for this feature is
from 0 to 990ms in 10ms increments.
This feature applies ONLY to the Keyboard Wedge interface.
See page 299 in “References” for detailed information and examples for setting this feature.
Select Wedge Quiet Interval Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
10 = Quiet Interval of 100 ms
To Next Page
Loading...
