Datalogic Gryphon I GD4100 Product Reference Guide

Direct Radio AutoLink ENTER/EXIT PROGRAMMING MODE
270 Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
DIRECT RADIO AUTOLINK
This feature enables/disables the ability to link a wireless handheld to a base station without
scanning the Unlink label first.
DEFAULT
Direct Radio Link = Unlink Label Required
Direct Radio Link = Automatic Unlinking
RF ADDRESS STAMPING
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be transmitted to the host
and, if so, at what position with respect to the label data. See page 318 in “References” for
detailed information and examples for setting this feature.
DEFAULT
Source Radio Address Transmission = Do Not Include
Source Radio Address Transmission = Prefix
When included as a prefix, the source-radio ID is displayed after all label
formatting has been applied. The 6 byte hex address is sent as 12 ascii char
-
acters, i.e., an address of 00 06 66 00 1A ED will be sent as (shown in hex):
30 30 30 36 3
6 36 30 30 31 41 45 44

Datalogic Gryphon I GD4100 Specifications

General

Brand	Datalogic
Model	Gryphon I GD4100
Category	Barcode Reader
Language	English