ENTER/EXIT PROGRAMMING MODE Label ID
Product Reference Guide 81
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following
the transmitted barcode data depending upon how this option is enabled. This feature provides
options for configuring custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets"
below) or individually per symbology (see "Label ID: Set Individually Per Symbology" on page 81).
If you wish to program the reader to always include an industry standard label identifier for ALL
symbology types, see the previous feature "Global AIM ID" on page 79.
See Label ID, starting on page 307 of “References” for more information on setting this feature.
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded Sets, starting on
page 307 for details on the USA set and the EU set.
CAUTION
DEFAULT
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
When changing from one Label ID set to another, all other reader configu-
ration settings, including the host interfac
e type, will be erased and set to
the standard factory defaults. Any custom configuration or custom defaults
will be lost.
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology. See Label ID: Set
Individually Per Symbology, starting on page 309 for detailed instructions on sett
ing this feature.
To Next Page
Loading...
Need help?
General
