ENTER/EXIT PROGRAMMING MODE Good Transmission Beep
Product Reference Guide 259
WIRELESS BEEPER FEATURES
Several options are available to configure beeper behavior for RF operation.
Good Transmission Beep
Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs when a
Label is correctly transmitted to the base.
Good Transmission Beep = Disable
Good Transmission Beep = Enable
DEFAULT
Beep Frequency
Adjusts radio-specific beep indications to sound at a low, medium or high frequency, selectable
from the list below. (Controls the beeper’s pitch/tone.)
Beep Frequency = Low
Beep Frequency = Medium
Beep Frequency = High
To Next Page
Loading...
Need help?
General
