ENTER/EXIT PROGRAMMING MODE Host Commands — Obey/Ignore
Product Reference Guide 39
GLOBAL INTERFACE FEATURES
The following interface features are configurable by all interface types.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set to
ignore, the reader will ignore all host commands except for those necessary for:
•service mode
• flash programming mode
• keeping the interface active
• transmission of labels.
Host Commands = Obey
Host Commands = Ignore
USB Suspend Mode
This setting enables/disables the ability of USB interfaces to enter suspend mode.
USB Suspend Mode = Disable
USB Suspend Mode = Enable
To Next Page
Loading...
