ENTER/EXIT PROGRAMMING MODE STAR Radio Transmit Mode
Product Reference Guide 273
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good transmission as soon as the B
ase Station
receives a label
• ACK when sent to host — scanner signals a good transmission as soon as the Base Station
has sent the label to the host
• ACK from host — scanner signals a good transmis
sion as soon as the Ba
se Station has sent
the label to the host and host has replied with an acknowledge message.
ACK from cradle
ACK when sent to host
ACK from host
ACK from host works only for RS232 or USB-COM interfaces with ACK/
NACK disabled. If ACK from host is configured with any other interface
conditions, it works like ACK when sent to host.
See
"Message Formatting" on page 323
for details.