GRYPHON™ I System and Network Layouts
Product Reference Guide
27
The link label is a Code 128 function 3 label with the following format:
<FN3 char>LnkB<12 c
haracter bluetooth address>
4. Scan the link label you created in step 3.
Linking to a PC in HID
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the Link to a PC in HID barcode below to make the scanner visible
to the host
computer.
Link to a PC in HID
3. Use the host computer's Bluetooth manager to "Discover new devices" and select "Data-
logic Scanner." If you receive an error message, it may be necessary
to disable security on
the device.
4. Select "connect" on the PC to link the reader to the
PC. Use a text editing program to see
incoming data from the reader.
GRYPHON™ I System and Network Layouts
Stand Alone Layouts
Figure 13. Single Reader Layout
To Next Page
Loading...
Need help?
General
