ENTER/EXIT PROGRAMMING MODE Wand Idle State
Product Reference Guide 75
Wand Idle State
This feature specifies the level of the Wand output signal when the reader is idle.
Wand Idle State = Low
Wand Idle State = High
TTL logic levels:
0V <= Low <= 0.7V
2.4V <= High <= 5.25V
Transmit Noise
This option specifies the leading/trailing noise for the Wand interface.
DEFAULT
Transmit Noise = Disable
Transmit Noise = Transmit leading noise
Transmit Noise = Transmit trailing noise
Transmit Noise = Transmit leading and trailing noise
To Next Page
Loading...
