V1108, 6.20
When the function key ‘view’ has been pressed a new, temporary button bar appears with
additional function keys:
6.ac
The other function keys cannot be selected here, until one of these three function keys has
been chosen. The temporary bar will disappear again.
When the function key ‘edit’ has been pressed a new, temporary button bar appears with
additional function keys:
6.ad
edit Edit the tool library with one of the following commands:
- edit
- add
- copy
- delete.
Function keys:
normal dir. Select the normal view of the tool collection. This is the
standard setting.
graphical
dir.
To get a graphical overview of the shapes as available in
the library including main dimensions.
Function keys:
edit Modify the currently selected tool.
add Create a new tool and add it to the tool collection.
Function keys:
To Next Page
Loading...
