Table 46. Network Settings details(continued)
Option Description
generated value. A value of all FF is not allowed. This is set to
FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF by default.
Host Security Key Path This field specifies the Host security key path.
NVMe-oF SubSystem Settings This field controls the parameters for the NVMe-oF subsystem n
connections.
Table 47. PXE Device n Settings details
Option Description
Interface Specifies NIC interface used for the PXE device.
Protocol Specifies Protocol used for PXE device. This option is set to IPv4 or IPv6. This option is set to
IPv4 by default.
VLAN Enables VLAN for PXE device. This option is set to Enabled or Disabled. This option is set to
Disabled by default.
VLAN ID Shows the VLAN ID for the PXE device
VLAN Priority Shows the VLAN Priority for the PXE device.
Table 48. HTTP Device n Settings details
Option Description
Interface Specifies NIC interface used for the HTTP device.
Protocol Specifies Protocol used for HTTP device. This option is set to IPv4 or IPv6. This option is set
to IPv4 by default.
VLAN Enables VLAN for HTTP device. This option is set to Enable or Disable. This option is set to
Disable by default.
VLAN ID Shows the VLAN ID for the HTTP device
VLAN Priority Shows the VLAN Priority for the HTTP device.
DHCP Enables or disables DHCP for this HTTP device. This option is set to Enable by default.
IP Address Specifies IP address for the HTTP device.
Subnet Mask Specifies subnet mask for the HTTP device.
Gateway Specifies gateway for the HTTP device.
DNS info via DHCP Enables or disables DNS Information from DHCP. This option is set to Enable by default.
Primary DNS Specifies the primary DNS server IP address for the HTTP Device.
Secondary DNS Specifies the secondary DNS server IP address for the HTTP Device.
URI (will obtain from DHCP
server if not specified)
Obtain URI from the DHCP server if not specified
TLS Authentication
Configuration
Specifies the option for TLS authentication configuration.
Table 49. TLS Authentication Configuration screen details
Option Description
TLS Authentication Mode View or modify the device's boot TLS Authentication Mode. This option is set to One
Way by default. None means the HTTP server and the client will not authenticate each
other for this boot.
Root Certificate Configuration Import, delete, or export the root certificate.
44 Pre-operating system management applications
To Next Page
Loading...
