Delta MH300 Series - Appendix B. Revision History

Appendix B. Revision History
MH300
A-1
Appendix B. Revision History
New information
Description
Related part
New parameters and functions according to firmware V2.00:
 Parameter group 00:
00-10 (setting 10), 01-43 (setting 16), 01-72–01-77
 Parameter group 02: 02-01–02-07 + 02-26–02-28 (setting 78–80), 02-13 + 02-16
+ 02-17 + 02-36–02-38 (setting 49)
 Parameter group 06: 06-02 setting 2–3
 Parameter group 07: 07-63
 Parameter group 08: 08-79–08-82
 Parameter group 09: 09-31, 09-60
 Parameter group 11: 11-40, 11-43–11-46, 11-50–11-54, 11-56–11-60,
11-62–11-64, 11-68–11-76, 11-78
 Parameter group 13: 13-00 (setting 10)
Chapter 11, 12
Add 16-10 CANopen Master Control Applications and 16-11 Modbus Remote IO
Control Applications (Use MODRW).
Chapter 16
Updated information
Description Related part
Update the specification of the heat shrink tube.
Chapter 5
Update the information of the control terminal specifications: +24V, S1 / S2, and DCM.
Chapter 6
Update the information of optional accessories of magnetic contactor, air circuit
breaker and AC / DC reactors.
Chapter 7
Update the overload capability information of general specifications.
Add the link of the information on Certifications and Declaration of Conformity (DoC).
Chapter 9
Update the keypad operation process-shifting datas.
Chapter 10
Update parameter settings and descriptions:
 Parameter group 00: 00-01, 00-02, 00-04, 00-07, 00-16, 00-20, 00-21, 00-25,
00-27, 00-30, 00-31, 00-35, 00-36, 00-47
 Parameter group 02: 02-01–02-07 + 02-26–02-28, 02-13 + 02-16 + 02-17 +
02-36–02-38, 02-54
 Parameter group 03: 03-19, 03-20
 Parameter group 05: 05-26–05-30, 05-43
 Parameter group 06: 06-01, 06-02, 06-08, 06-11
 Parameter group 07: 07-13, 07-19, 07-23
 Parameter group 08: 08-01, 08-15, 08-23, 08-31
 Parameter group 09: 09-04 (Upadat Modbus Protocol information and move to
Appendix A), 09-30
 Parameter group 11: 11-26, 11-29–11-32
 Parameter group 12: 12-15, 12-16
Chapter 11, 12