Delta MH300 Series - 7-13 Mounting Adapter Plate

Chapter 7 Optional AccessoriesMH300
7-81
7-13 Mounting Adapter Plate
This
mounting adapter accessory is to change the wiring method for the MS300 / MH300 series to
provide flexible installation. It changes the wiring from the main input/motor output at the bottom to the
main input from the top and the motor output from the bottom. However, when you use the mounting
adapter plate to change the drive from the VFD-E / VFD-EL series to the MS300 / MH300 series, you can
still use the original wiring method. The following table shows the correspondences.
MKM-MAPB
Applicable for frame A and B
Unit: mm [inch]
Fig. 7-105
Series
Models
MS300 / MH300 VFD-E VFD-EL
MKM-MAPB Frame A–B Frame A Frame A
MKM-MAPC
Frame C
Frame B
Frame B
Table 7-69