Chapter 8 Option CardsMH300
8-41
8-14 CMM-EC02 -- Communication Extension Card, EtherCAT
8-14-1 Product Profile
Figure 8-88
Figure 8-89
Wire: 0.25–0.5 mm
2
/ (24–20 AWG)
Stripping length: 7–8 mm
Torque: 2 kg-cm / (1.7 Ib-in.) / (0.2 Nm)
1. Screw fixing hole
2. Positioning hole
3. AC motor drive
connection port
4. Communication
Port
5. Indicator
lights
6.
Ground terminal
block
8-14-2 Features
1. Supports speed mode
2. Supports st
andard CANopen CiA 402 decoding (CoE)
3.
Supports reading and writing parameters
4.
Supports st
op during disconnection
8-14-3 Specifications
Network Interface
Interface RJ45
Number of ports 2 ports
Transmission method
IEEE 802.3,IEEE 802.3u
Transmission cable Category 5e shielding 100M
Transmission speed 100Mbps
Table 8-43
Electrical Specification
Power supply voltage 15 V
DC
Power consumption 0.8 W
Insulation voltage 500 V
DC
Weight 27 g
Table 8-44
Environment
Noise immunity
ESD (IEC 61800-5-1, IEC 6100-4-2)
EFT (IEC 61800-5-1, IEC 6100-4-4)
Surge Test (IEC 61800-5-1, IEC 6100-4-5)
Conducted Susceptibility Test (IEC 61800-5-1, IEC 6100-4-6)
Operation / Storage
Operation: -10–50º C (temperature), 90% (humidity)
Storage: -25–70º C (temperature), 95% (humidity)
Shock / Vibration
resistance
International standards:
IEC 61800-5-1, IEC 60068-2-6 / IEC 61800-5-1, IEC 60068-2-27
Table 8-45