Delta MH300 Series - 16-3 Turn On

Chapter 16 PLC Function ApplicationsMH300
16-5
16-3 Turn On
16-3-1 Connect the Drive to the PC
You star
t operating the PLC functions with the following steps:
After pressing the MENU key and choosing 4: PLC on the KPC-CC01 digital keypad (optional),
press the ENTER key (see Figure 16-3 below).
Figure 16-3
1. Wiring: Connect the drive’s RJ45 communication interface to a PC through the RS-485 cable.
Figure 16-4
2. PLC function usage
Digital keypad KPC-CC01 (optional)
Figur
e 16-5
PLC functions are as shown in Figure 16-5 on the left;
select item 2 PLC Run to enable the PLC functions.
1: No function (Disable)
2: Enable PLC (PLC Run)
3: Stop PLC functions (PLC Stop)