Chapter 7 Optional AccessoriesMH300
15. PC Link
1. TPEditor: This function enables you to connect the keypad to a computer
then download and edit user-defined screens.
Press ENTER to go to Waiting to connect to PC
screen.
In TPEditor, from the Communication menu, choose Write to HMI.
In the Confirm message box, click YES.
The software starts downloading screens to
edit to the KPC-CC01.
Download completed
2. VFDSoft: this function enables you to link to the VFDSoft then upload the
parameters 1–4 you have saved in the KPC-CC01.
NOTE:
If the Operation System (OS) of your computer is Windows 10, right-
the VFDSoft icon to enter the Property. Then, click the Compatibility
and select the Run this program as an administrator
checkbox. (as
shown in the red frames in the figure below)
To Next Page
Loading...
