Delta MH300 Series User Manual

Chapter 14 Fault CodesMH300
14-43
ID No. Display Fault Name Description
34
V-phase error
(cd2)
V-phase current detection error when power is ON.
Action and Reset
Action condition Hardware detection
Action time cd2 acts immediately when the drive detects the fault.
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If the fault code still displays on the keypad, return to the factory for repair.

Delta MH300 Series Specifications

General

Brand	Delta
Model	MH300 Series
Category	DC Drives
Language	English