Develop ineo+ 550 - Basic Tab; Layout Tab; Finish Tab

3
Print Operations
3-4 ineo+ 650/550/451
Basic tab
Layout tab
Finish tab
Item Function
Original Orientation Specifies the orientation of the original document.
Original Size Specifies the size of the original document.
Paper Size Specifies the output paper size. Automatically enlarges or reduces when the Orig-
inal Size setting is changed.
Zoom Specifies the enlargement and reduction ratio.
Paper Tray Selects the paper tray for printing.
Paper Type Selects the paper type for printing.
Output Method For non-conventional printing, selects special output methods such as "Secure
Print" or "Save in User Box".
[User Settings] Specifies the ID and password, or the file name and box number when performing
"Secure Print" or "Save in User Box".
[Authentication/Account Track] Specifies the user name and password when performing user authentication, and
the department name and password when performing account track on this ma-
chine.
Copies Specifies the number of copies to print.
Collate Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of each set.
Paper Settings for Each Tray Specifies the paper type for each paper tray.
Item Function
Combination Prints multiple pages on one page, or prints one sheet of an original document di-
vided on multiple pages. Details can be specified by clicking the [Combination De-
tails] button.
Rotate 180 Prints the image rotated 180°.
Skip Blank Pages Does not print blank pages in the data.
Chapter Specifies the page to be printed on the front side.
Print Type Specifies duplex printing and booklet printing.
Binding Direction Specifies the binding position.
Binding Margin Specifies the binding margin. Click the [Binding Margin Settings] button to specify
the margin values.
Image Shift Prints by shifting the entire print image. Click the [Image Shift Settings] button to
specify the image shift values.
Item Function
Staple Specifies stapling.
Saddle Stitch Specifies to saddle stitch a printed document.
Punch Specifies hole punching.
Fold Specifies folding.
Output Tray Specifies the tray where to output the printed pages.
Paper Arrangement Specifies the method for adjusting the binding position.