Develop ineo+ 550 - Specifying the Zoom Ratio of the Document (Full Size Setting)

2
Copy Operations
2-38 ineo+ 650/550/451
Specifying the zoom ratio of the document ("Full Size" setting)
A copy that is the same size as the document (100%) is produced.
0 As the factory default, "Full Size" is selected.
0 Touch [+] to enlarge the zoom ratio, and touch [-] to reduce the zoom ratio in 0.1% increments.
1 In the Basic screen, touch [Zoom].
The Zoom screen appears.
2 Touch [Full Size].
3 Touch [OK].
The Basic screen appears again.