Develop ineo+ 550 - Printing; Available Print Settings; To Print a Document

ineo+ 650/550/451 4-37
Box Operations
4
4.11 Printing
Available print settings
Settings can be specified for the following when a document is printed.
!
Detail
The Fold/Bind and Center Staple/Fold settings are available only if the optional finisher is installed.
The Punch settings are available only if the punch kit is installed on the optional finisher.
For details on combining multiple documents and printing, refer to "Combined printing" on page 4-43.
To print a document
1 From the Use Document screen, select the document to be printed.
2 Under "Action", touch [Print].
Available parameters Description Page reference
Copies Specify the number of copies to be printed. p. 4-38
Print Select whether a single-sided or double-sided copy is to be
printed.
p. 4-38
Finishing Specify settings for collating, grouping, stapling, hole punch-
ing, folding/binding or center stapling/folding.
p. 4-39
Page Margin Print the document with a binding margin added.
Sheet/Cover/Chapter Insert Print the document with other paper added as cover sheets,
insertions or chapter title pages.
Stamp/Composition Print the document with the date/time, page number or a
stamp added.