Develop ineo+ 550 - Configure Tab; Settings Tab

3
Print Operations
3-6 ineo+ 650/550/451
Configure tab
2
Note
To display the Configure tab in Windows 2000/XP/NT 4.0/Server 2003, right-click the icon of the
installed printer, and then click "Properties".
You cannot use the "Acquire Device Information" function if you are not connected to or able to
communicate with this machine.
Settings tab
2
Note
To display the Settings tab in Windows 2000/XP/NT 4.0/Server 2003, right-click the icon of the installed
printer, and then click "Properties".
Item Function
Device Option Specifies the status of the options that are installed on this machine and the status
of the user authentication and account track functions. Specify the status of each
item from the "Setting" drop-down list.
Paper Tray Information Shows the paper type specified for each tray. Click the [Paper Tray Settings] but-
ton to specify the settings for each paper tray.
Acquire Device Information Communicates with this machine to read the status of the installed options.
Acquire Settings Specifies the status of the connection that executes getting the option informa-
tion.
Encrypt. Passphrase Enters the encryption passphrase when it is user defined by communicating with
this machine.
Software Tools Starts up software tools such as Web Connection.
Item Function
EMF Spool When using an original system environment, select this check box if a metafile
(EMF) spool is required.
Display Constraint Message Displays a message when functions that cannot be specified at the same time
were enabled from the printer driver.
Display paper set in Print Server
Properties.
Uses the paper that was added in [Server Properties] of the printer folder.
Verify Authentication settings
before printing
Verifies the authentication settings for this machine before printing and displays a
message if the settings are not compatible.
Popup Authentication Dialog
when printing
Displays the User Authentication/Account Track dialog box when a print job is
specified to enter the user name and department name.
Save Custom Size Saves the custom paper sizes.