Develop ineo+ 550 - Original Documents; Documents that Can be Loaded into the ADF

ineo+ 650/550/451 2-95
Copy Operations
2
2.25 Original documents
When making copies, load the document into the ADF or position it on the original glass.
To copy documents that cannot be loaded into the ADF, position them on the original glass.
Documents that can be loaded into the ADF
There are three methods for using the automatic document feeder.
- Normal method
- For documents of mixed sizes
- For Z-folded documents
There are limits on the types of documents that can be loaded with each method.
Normal method
For documents of mixed sizes
Mixed originals paper sizes
The following chart shows the possible combinations of standard-sized paper that can be used with the
"Mixed Original" setting.
o available
e not available
!
Detail
*1
Indicates the width of the widest document size of the mixed originals (width of the adjustable lateral
guides of the automatic document feeder).
*2
Indicates document sizes that can be specified together with the maximum document width.
Single-sided documents Double-sided documents
Document paper type/Weight Plain paper:
35 g/m
2
to 210 g/m
2
Plain paper:
50 g/m
2
to 128 g/m
2
Document size A3 w to B6 w, A6 w,11 e 17 w, 11 e 15 w, 8 e 13 w,
8-1/2 e 11 w/v
Paper capacity 100 sheets (80 g/m
2
)
Single-sided documents Double-sided documents
Document paper type/Weight Plain paper: 50 g/m
2
to 128 g/m
2
Document size Refer to "Mixed originals paper sizes".
Paper capacity 100 sheets (80 g/m
2
)
Maximum Document
Width
*1
Document Size
*2
A3 w A4 v B4 w B5 v A4 w A5 v B5 w A5 w
A3 w ooeeeeee
A4 v ooeeeeee
B4 w ooooe e e e
B5 v ooooe e e e
A4 w ooooooe e
A5 v eeooooee
B5 w e e oooooe
A5 w eeeeeeoo