ineo+ 650/550/451 8-21
Network Fax Operations (Option)
8
8.7 Send a fax with program destination
When the program destination is registered, a fax can be sent by specifying the registered program button.
If transmission settings (Original type and original specification etc.) are registered by a program button, a fax
can be sent only by touching that button without specifying function settings at each time.
The transmission is possible once after registering group button in 1 program button.
Sending a fax after specifying program destination
1 Press [Fax/Scan] key to display the Fax/Scan screen.
2 Load the original.
– Refer to "Feeding the document" on page 2-26 for details on positioning the original.
3 Press [Mode Memory] key.
4 Touch [Page List].
5 Touch the page button registered by the targeted program and then touch [OK].
– Page button is displayed on touching and .
To Next Page
Loading...
