ineo+ 650/550/451 2-49
Copy Operations
2
Offset If no finisher is installed
If the sorting conditions are met, printed copies are fed out and sorted in an
alternating crisscross pattern.
If a finisher is installed
The copies are fed out and stacked on top of each other with each set shifted
to separate it.
Fold/Bind Select one of these settings to fold copies. The copies can also be bound with
staples at the same time.
A Fold/Bind setting can be used if optional finisher FS-608 is installed.
Center Staple/Fold Select this setting to fold copies. The copies can also be bound with staples at
the same time.
The "Center Staple & Fold" setting can be used if the saddle stitcher is installed
on optional finisher FS-519.
Output Tray Select the output tray where the finished copies are to be fed.
This setting can be used if optional finisher FS-519 is installed.
Staple Select one of these settings to bind the copies with a staple in the corner or
with two staples.
Setting Description
To Next Page
Loading...
