Develop ineo+ 550 - Page 93

ineo+ 650/550/451 2-55
Copy Operations
2
When Finisher FS-519 is installed
!
Detail
In order for the copies to be stapled, all of the following conditions must be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 148.5 mm and 431.8 mm.
If the "Mixed Original" setting is selected, all copies must be printed with paper of the same width.
Number of Bound Pages
Examples of the possible number of bound pages are listed below.
- 50 sheets of 90 g/m
2
paper
- 2 sheets of 209 g/m
2
paper + 48 sheets of 90 g/m
2
paper
- Maximum of 30 sheets of 91 to 120 g/m
2
paper
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
Tray Paper weight Paper size Loading Capacity
Finishing tray 1 Plain paper (64 g/m
2
to
90 g/m
2
)
A3 w to A5 v When the stack is 32 mm high or contains
200 sheets or 20 sets
Thick paper 1 (91 g/m
2
to 120 g/m
2
)
Finishing tray 2 Plain paper (64 g/m
2
to
90 g/m
2
)
A3 w to A5 v A4 w or smaller: 132 mm high,
1,000 sheets or 100 sets
B4 w or larger: When the stack is
64.5 mm high or contains 500 sheets or
50 sets
Thick paper 1 (91 g/m
2
to 120 g/m
2
)
Optional finish-
ing tray
Plain paper (64 g/m
2
to
90 g/m
2
)
A3 w to A5 v When the stack is 24 mm high or contains
200 sheets or 20 sets
Thick paper 1 (91 g/m
2
to 120 g/m
2
)